How to install LED light strips correctly? Next, let's continue to explain to you the manufacturer of the lighting strip.

1. Firstly, determine the length to be installed, and then truncate it as an integer. This type of light strip is a unit of 1 meter, and only when cut through the cutting edge will it not affect the circuit. If cut arbitrarily, it will cause a unit to not light up. For example, if a length of 7.5 meters is required, the light strip needs to be cut by 8 meters.

2. Link plug, LED itself is a diode, driven by direct current, so it has positive and negative poles. If the positive and negative poles are reversed, it is in an insulation state and the light strip is not lit. If the connecting plug does not turn on when powered on, simply remove the other end of the light strip.

3. The placement of light strips is packaged in trays. Newly opened light strips may be twisted and difficult to install. You can first organize and level them before placing them in the light groove. Due to the fact that the light strip emits light from one side, uneven placement can result in uneven lighting, especially at corners.

4. Lamp strip companion, there is now a clip specifically designed for installing lamp slots and strips on the market, called a lamp strip companion. After use, it will greatly improve the installation speed and effectiveness.

The above is a tutorial on LED light strips. For more LED light strip options, please feel free to contact us.